Alkalize/Ionizer, Mineralizer & Oxidation Cartridge
Alkalize/Ionizer, Mineralizer & Oxidation Cartridge
$56.05
Regular price $59.00
Save $2.95 compared with one-time purchase
- Free shipping Qualifies for free shipping! Free shipping over $150 Residential orders within the lower 48 US states
- Lifetime support from our team Call, email or chat with your water filtration experts
Made in USA
Couldn't load pickup availability
Description
Reverse osmosis water is clean, but it can taste flat. RO removes nearly everything dissolved in water, including the calcium and magnesium that give water its body, and the water that comes out is often slightly acidic. Soft, low-pH well water has the same problem, and it can be corrosive to plumbing.
The Crystal Quest Alkalize/Ionizer, Mineralizer & Oxidation Cartridge puts minerals back. It is an alkaline mineralizer cartridge filled with a blend of calcite and magnesium oxide. As water flows through, the media slowly dissolves into it, adding minerals and raising pH, in a drop-in cartridge for four standard housing sizes.
At a glance
- Adds calcium and magnesium back to RO water or naturally soft water
- Raises pH and alkalinity, making acidic water less corrosive
- Natural mineral media: a blend of calcite and magnesium oxide
- Typically 12 to 24 months of service in every size
- Four drop-in sizes, 0.5 to 6 GPM, for countertop, under-sink and whole house housings
What you are looking at
Each cartridge is a polypropylene shell filled with the mineral blend, held in place by a polypropylene expansion pad and followed by a spun polypropylene post-filter, which catches any fine mineral particles before the water leaves the cartridge. Polypropylene end caps and a Buna-N top gasket seal it in the housing. Because the media dissolves as it works, the bed slowly shrinks over its service life. Each end cap has 1-micron pads behind its openings.
How an alkaline mineralizer cartridge works
Why RO water and soft water run acidic
Pure water has almost no buffering capacity. Carbon dioxide from the air dissolves into it and forms carbonic acid, which pulls the pH down. Hard water resists that drop because its dissolved minerals neutralize the acid. RO water and naturally soft water have little of that mineral buffer, so their pH falls easily.
Carbonate minerals neutralize the acid
Calcite and magnesium oxide react with that acidity. As they dissolve, they neutralize carbonic acid and leave behind bicarbonate alkalinity and dissolved calcium and magnesium. The pH rises, and the added alkalinity acts as a buffer that helps hold it there, which makes the water less corrosive to pipes and fixtures.
Self-adjusting by nature
Carbonate minerals dissolve fastest in acidic water and slow down as the water approaches balance. More acidic water takes up more mineral; water that is already balanced takes up little. That is why the cartridge does not promise a fixed output pH: the result depends on the water going in, its contact time and its flow.
What it reduces
Primary targets:
- Acidity (low pH) in reverse osmosis water and naturally soft, low-mineral water
- The corrosiveness of acidic water toward pipes and fixtures
Also reduced: the flat taste of very low-mineral water. The cartridge does this by adding calcium, magnesium and alkalinity, not by removing anything.
Not designed to treat: it is a mineralizer, not a filter for contaminants. It does not remove chlorine, chemicals, lead or other heavy metals, fluoride, nitrate, arsenic, bacteria or viruses. It also adds hardness, so it is not meant for water that is already hard or already high in pH. For chlorine and metals, put a SMART Filter Cartridge ahead of it.
Is it right for my water?
- After reverse osmosis: the most common use. Put the minerals back into RO water as the final stage.
- Soft or slightly acidic water: raise the pH of naturally soft, low-mineral water at a drinking water tap or in a cartridge system.
- Strongly acidic well water for a whole home: talk to us about an acid neutralizing whole house system, which holds far more media than a cartridge.
This page sells the four drop-in sizes. Crystal Quest also makes a sealed inline alkaline mineralizer cartridge for RO systems and water coolers, and an Alkalizing + SMART Filter Cartridge that adds carbon, redox and other filtration media to the mineral blend.
Why Crystal Quest
- Natural mineral media, described exactly: calcite and magnesium oxide.
- Honest about results: no promised output pH, because your incoming water decides it.
- Three formats (drop-in, sealed inline and SMART combination) so the mineral stage fits your system.
- Over 1,000,000 people served since 1994. Crystal Quest builds under ISO 9001 quality management, has made water filtration in the USA for over 30 years and offers lifetime support by phone, email or chat.
Where it fits
- Countertop and under-sink systems that take the 2-7/8" x 9-3/4" size, as the last stage.
- Whole house cartridge systems with slim 20" or Big Blue housings, after the filtration stages.
Choose the size printed on your current cartridge or in your order history: 2-7/8" x 9-3/4" (CQE-RC-04058), 2-7/8" x 20" (CQE-RC-04091), 4-5/8" x 9-3/4" (CQE-RC-04092) or 4-5/8" x 20" (CQE-RC-04093).
Common questions
What does an alkaline mineralizer cartridge add to my water?
Calcium and magnesium, from a blend of calcite and magnesium oxide. As the media dissolves, it also raises pH and alkalinity.
Does it guarantee a particular pH?
No. No fixed output pH is specified. The result depends on your incoming water, flow and contact time; more acidic water takes up more mineral.
Can I use it after reverse osmosis?
Yes. That is its most common use. Place it after the RO membrane so it puts minerals back into the purified water.
Is this the same as the sealed inline cartridge or Alkalizing + SMART?
No. This page offers four drop-in sizes. The sealed inline mineralizer is a different cartridge format, and the SMART combination adds carbon, redox and other filtration media.
How long does an alkaline filter cartridge last?
Typically 12 to 24 months, about 18 months for most homes. The media dissolves as it works, so replace it sooner if pH or taste changes.
Which size fits my housing?
Match the actual size on your current cartridge: 2-7/8" x 9-3/4" fits 2.5" x 10" housings, 2-7/8" x 20" fits 2.5" x 20", 4-5/8" x 9-3/4" fits 5" x 10" Big Blue and 4-5/8" x 20" fits 5" x 20" Big Blue. Each size has its own flow rate.
Specifications
Specifications for your selection
2-7/8” x 9-3/4” / Single
- SKU
- CQE-RC-04058
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
2-7/8” x 9-3/4” / Single
- SKU
- CQE-RC-04058
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
2-7/8” x 9-3/4” / Pack of 2
- SKU
- CQE-RC-04058-2PK
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
2-7/8” x 9-3/4” / Pack of 4
- SKU
- CQE-RC-04058-4PK
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
2-7/8” x 20” / Single
- SKU
- CQE-RC-04091
- Flow rate
- 2.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Specifications for your selection
2-7/8” x 20” / Pack of 2
- SKU
- CQE-RC-04091-2PK
- Flow rate
- 2.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Specifications for your selection
2-7/8” x 20” / Pack of 4
- SKU
- CQE-RC-04091-4PK
- Flow rate
- 2.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Specifications for your selection
4-5/8” x 9-3/4” / Single
- SKU
- CQE-RC-04092
- Flow rate
- 3.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
4-5/8” x 9-3/4” / Pack of 2
- SKU
- CQE-RC-04092-2PK
- Flow rate
- 3.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
4-5/8” x 9-3/4” / Pack of 4
- SKU
- CQE-RC-04092-4PK
- Flow rate
- 3.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Specifications for your selection
4-5/8” x 20” / Single
- SKU
- CQE-RC-04093
- Flow rate
- 6.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Specifications for your selection
4-5/8” x 20” / Pack of 2
- SKU
- CQE-RC-04093-2PK
- Flow rate
- 6.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Specifications for your selection
4-5/8” x 20” / Pack of 4
- SKU
- CQE-RC-04093-4PK
- Flow rate
- 6.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
- Cartridge type
- Alkalize/Ionizer, Mineralizer & Oxidation Cartridge
- Format
- Drop-in replacement cartridge
- Dimensions
- Actual cartridge diameter x length in inches; nominal housing names are not cartridge measurements
- CQE-RC-04058 (2-7/8” x 9-3/4”)
- 0.5 GPM; typically replace in 12 to 24 months; actual life depends on water and usage
- CQE-RC-04091 (2-7/8” x 20”)
- 2.5 GPM; typically replace in 12 to 24 months; actual life depends on water and usage
- CQE-RC-04092 (4-5/8” x 9-3/4”)
- 3 GPM; typically replace in 12 to 24 months; actual life depends on water and usage
- CQE-RC-04093 (4-5/8” x 20”)
- 6 GPM; typically replace in 12 to 24 months; actual life depends on water and usage
- Filter media
- Calcite and magnesium oxide
- Size selection
- Use the exact actual cartridge measurements and specified system replacement
- Replacement guidance
- Typically 12 to 24 months, about 18 months for most homes; actual life depends on water quality and usage
Full specifications by size
Alkaline mineralizer cartridge specifications
Published ratings apply to the selected cartridge and listed conditions. Service life is an estimate that depends on incoming water and usage.
| SKU | SIZE | FITS HOUSING | FLOW RATE | SERVICE LIFE |
| CQE-RC-04058 | 2-7/8” x 9-3/4” | 2.5" x 10" | .5 gpm (1.9 lpm) | 12 to 24 months* |
| CQE-RC-04091 | 2-7/8” x 20” | 2.5" x 20" | 2.5 gpm (9.4 lpm) | 12 to 24 months* |
| CQE-RC-04092 | 4-5/8” x 9-3/4” | 5" x 10" Big Blue | 3 gpm (11.4 lpm) | 12 to 24 months* |
| CQE-RC-04093 | 4-5/8” x 20” | 5" x 20" Big Blue | 6 gpm (22.7 lpm) | 12 to 24 months* |
Media and treatment
| Media | Acid Neutralizing/pH Enhancing mix |
| Treatment method | Media slowly dissolves, neutralizing acidity and adding calcium, magnesium and alkalinity |
| Purpose | Mineralize and raise pH of RO, soft or acidic water; not a contaminant filter |
| Output pH | Not fixed; depends on incoming water, flow and contact time |
| Regeneration | None. Media is consumed; replace when spent |
| Construction Materials | |
| Fiber Media | Mixed Blend |
| End Caps | Polypropylene |
| End Pads | 1-micron pads behind the end-cap openings |
| Post-Filter | Spun Polypropylene |
| Outer Casing | Polypropylene |
| Expansion Pad | Polypropylene |
| Gasket | Buna-N (Top) |
| Temperature Rating | 40°F to 145°F (4.4°C to 62.8°C) |
*Typically 12 to 24 months, about 18 months for most homes. Actual life depends on incoming water and usage.