Quick FHA/VA Test
Tests your Well or City Water for..
Meets basic FHA/VA water testing requirements by checking for contaminants outlined in EPA regulations.
Important: To ensure accurate results, the water sample must be returned via Next Day shipping. Return shipping is not included.
Couldn't load pickup availability
Crystal Quest Problem Check Test
Crystal Quest has partnered with National Testing Laboratories, a trusted leader in water analysis, to provide accurate testing for drinking water in homes and buildings
This package is designed to meet FHA and VA minimum water testing requirements when no specific state or local guidelines apply. It screens for key contaminants listed in the EPA’s Primary and Secondary Drinking Water Regulations. For compliance, you should always confirm with your local health department before testing.
Testing is simple and convenient: just collect your sample and return it for analysis.
Get Results in 3 Easy Steps
1. Collect Sample
Fill kit’s bottles with water & complete enclosed form.
2. Return Sample
Return kit using guaranteed next-day delivery.
3. Receive Report
Receive clear results using EPA standards.
Full list of contaminents
Quick FHA/VA
- Total Coliform and E.ColiPresence/Absence
- E.ColiPresence/Absence
- Iron0.020
- Lead0.002
- Magnesium0.10
- Nitrate as N0.5
- pH (Standard Units)-
- Turbidity (Turbidity Units)0.1
Quick FHA/VA Instructions
Sampling Instructions - Please Read Before Starting
Step 1
After the blue ice pack has been in your freezer for at least 8 hours, you can collect your water sample from an appropriate water faucet or spigot. If the spout has a strainer or aerator, remove it prior to sampling
Step 2
Samples must be shipped the same day they are collected via guaranteed next day delivery
and must be collected after 1:00 p.m. EST to minimize time in transit. Do not collect and/
or ship your samples on a Friday, Saturday, Sunday, or the day before a National Holiday.
Fill both of the bottles, in order from 1 to 2 as shown in the picture to the right.
Bottle 1 - Before filling this bottle, disinfect the end and inside of the faucet spout using rubbing alcohol. After the faucet spout has been disinfected, flush it by running the water for 3 - 5 minutes. Remove the red tabbed plastic seal on the 125 mL plastic bottle. Do not touch the inside of the bottle or the inside of the cap. This bottle contains preservative. Do not rinse the preservative out of the bottle. Fill the bottle between the 100 mL and 120 mL fill lines. Do not fill any less or more as this will impact the analysis. [ see picture]. Replace the cap securely making sure not to touch the inside of the bottle or the inside of the cap.
Bottle 2 - Fill the 500 mL plastic bottle to the shoulder and replace the cap securely.
Step 3A
Complete the enclosed lab form, making sure to indicate the collection date and time you sampled, type of water, and sample identification (e.g. kitchen sink, well head,etc.) Return the blue ice pack to the kit and place the kit back in the cardboard box with the completed lab form.
Step 3B
Make arrangements to ship the kit by guaranteed next day delivery [or drop the kit off at our laboratory within 24 hours of collection, Monday to Friday, 8:30 am to 5:00 pm] to the following address:
National Testing Laboratories
556 South Mansfield Street
Ypsilanti, MI 48197
If we do not receive your sample within 24 hours of sample collection or if you have not provided the date and time of collection, the bacteria results will be marked INVALID!
Crystal Quest Problem Check Test
Crystal Quest has partnered with National Testing Laboratories, a trusted leader in water analysis, to provide accurate testing for drinking water in homes and buildings
This package is designed to meet FHA and VA minimum water testing requirements when no specific state or local guidelines apply. It screens for key contaminants listed in the EPA’s Primary and Secondary Drinking Water Regulations. For compliance, you should always confirm with your local health department before testing.
Testing is simple and convenient: just collect your sample and return it for analysis.
Get Results in 3 Easy Steps
1. Collect Sample
Fill kit’s bottles with water & complete enclosed form.
2. Return Sample
Return kit using guaranteed next-day delivery.
3. Receive Report
Receive clear results using EPA standards.
Full list of contaminents
Quick FHA/VA
- Total Coliform and E.ColiPresence/Absence
- E.ColiPresence/Absence
- Iron0.020
- Lead0.002
- Magnesium0.10
- Nitrate as N0.5
- pH (Standard Units)-
- Turbidity (Turbidity Units)0.1
Quick FHA/VA Instructions
Sampling Instructions - Please Read Before Starting
Step 1
After the blue ice pack has been in your freezer for at least 8 hours, you can collect your water sample from an appropriate water faucet or spigot. If the spout has a strainer or aerator, remove it prior to sampling
Step 2
Samples must be shipped the same day they are collected via guaranteed next day delivery
and must be collected after 1:00 p.m. EST to minimize time in transit. Do not collect and/
or ship your samples on a Friday, Saturday, Sunday, or the day before a National Holiday.
Fill both of the bottles, in order from 1 to 2 as shown in the picture to the right.
Bottle 1 - Before filling this bottle, disinfect the end and inside of the faucet spout using rubbing alcohol. After the faucet spout has been disinfected, flush it by running the water for 3 - 5 minutes. Remove the red tabbed plastic seal on the 125 mL plastic bottle. Do not touch the inside of the bottle or the inside of the cap. This bottle contains preservative. Do not rinse the preservative out of the bottle. Fill the bottle between the 100 mL and 120 mL fill lines. Do not fill any less or more as this will impact the analysis. [ see picture]. Replace the cap securely making sure not to touch the inside of the bottle or the inside of the cap.
Bottle 2 - Fill the 500 mL plastic bottle to the shoulder and replace the cap securely.
Step 3A
Complete the enclosed lab form, making sure to indicate the collection date and time you sampled, type of water, and sample identification (e.g. kitchen sink, well head,etc.) Return the blue ice pack to the kit and place the kit back in the cardboard box with the completed lab form.
Step 3B
Make arrangements to ship the kit by guaranteed next day delivery [or drop the kit off at our laboratory within 24 hours of collection, Monday to Friday, 8:30 am to 5:00 pm] to the following address:
National Testing Laboratories
556 South Mansfield Street
Ypsilanti, MI 48197
If we do not receive your sample within 24 hours of sample collection or if you have not provided the date and time of collection, the bacteria results will be marked INVALID!