Haven Replacement Filter Set
$199.00
Regular price $218.00
SKU CQE-RC-8001
Both Haven cartridges in one order: the PPC pre-filter and the 800 GPD membrane, complete or 3-year set.
Read moreCouldn't load pickup availability
Everything your Haven needs, in one order.
One pre-filter and one membrane renew both filters. The 3-year set adds two spare pre-filters.

What's inside
A polypropylene composite pre-filter and a thin film composite membrane, opened up. Tap any part to meet it.

-
In the pre-filter. The outer wrap of polypropylene fiber holds sediment, rust and silt.
-
In the pre-filter. Dense coconut shell carbon reduces chlorine, chloramine, VOCs and the taste and odor they leave.
-
In the pre-filter. Fine polypropylene holds finer particles ahead of the membrane.
-
In the membrane. Rated at 0.0001 micron: water passes through and dissolved contaminants are held back.
-
In the membrane. A fine mesh that keeps water sweeping across the membrane surface.
-
In the membrane. The perforated center tube where purified water collects on its way to your faucet.


Open the set
Your water passes the pre-filter first, then the membrane. Pull each one open.

The set
Two cartridges, one order.
The PPC pre-filter and the 800 GPD membrane, each keyed to its own bay in your Haven.

First
What your water meets.
Polypropylene holds sediment. A 0.0001 micron film reduces dissolved solids, metals and PFAS.

Then
What sits behind.
Coconut shell carbon reduces chlorine, chloramine and VOCs. A center tube collects purified water.

Both lights on?
One order renews both filters, and the 3-year set keeps the next two pre-filters ready.
What it reduces
Pick a concern to see which filter handles it.
Designed to reduce
Not designed to treat
Reduced by this cartridge
Dissolved solids (TDS)
Reduced at the thin film composite membrane.
- 5 micron sediment layeractive
- Coconut carbon block coreactive
- 1 micron polishing layeractive
- Thin film composite membrane, 0.0001 micronactive
Method: Reverse osmosis
The Haven Replacement Filter Set is best for
- Both lights on. One order renews both filters in your Haven at once.
- Planning ahead. The 3-year set keeps two spare pre-filters on your shelf for the next PPC lights.
- Paying less per cartridge. Either set costs less than the same cartridges bought one at a time.
It is not the right fit for
- Any system other than Haven. Both cartridges are Haven-only and fit no other system.
- Changing only one cartridge. Choose the single PPC pre-filter or the single membrane instead.
- Water of unknown safety. Haven is not a disinfection system; use it only on microbiologically safe water; add inline UV.
Fit and care
Haven only. The pre-filter pushes into the top bay every 12 to 18 months, the membrane into the lower bay every 36 to 48.
Glance
The PPC and RO lights on the front panel tell you when each one is due.
Push
Release the pressure, press the release beside the bay, push the new one in until it seats.
Reset
Open the feed valve, check for leaks, reset each light and flush for about 30 seconds.


Three years, ready on your shelf.
The 3-year set keeps two spare pre-filters waiting, so the next two PPC lights are handled.
Description
Everything your Haven needs, in one order.
The lights will come on. The only question is whether the next filters are already on your shelf. This set holds both cartridges inside every Haven: the PPC composite pre-filter and the 800 GPD RO membrane.
Choose your set
- Complete set: 1 PPC pre-filter and 1 RO membrane, for one full change.
- 3-year set: 3 PPC pre-filters and 1 RO membrane. The pre-filter lasts 12 to 18 months and the membrane 36 to 48, so three pre-filters cover about one membrane's life. Fit the pair when both lights are on; the spare pre-filters wait their turn.
Either set costs less than the same cartridges bought one at a time.
What each cartridge does
The PPC pre-filter reduces chlorine, chloramine, chemical contaminants, VOCs, sediment, and bad taste and odor, and keeps chlorine off the membrane.
The RO membrane, a 0.0001 micron TFC membrane, reduces dissolved solids, fluoride, heavy metals such as chromium, selenium and arsenic, and PFAS, including PFOA and PFOS. It rejects 95 to 99% of dissolved solids and 94 to 96% of fluoride and arsenic, based on Crystal Quest internal testing and field performance. Results depend on your water.
Haven is not a disinfection system; use it only on microbiologically safe water; add inline UV.
The change takes minutes
Press the release, pull the old one out, push the new one in, reset the light. No tools. Close the feed valve first, fit the pre-filter in the top bay and the membrane in the lower bay, then flush for about 30 seconds; the Maintenance & care tab has every step.
Use only genuine Crystal Quest filters in Haven. Real people answer at (800) 934-0051. Changing one cartridge? Choose the Haven PPC Composite Pre-Filter or the Haven 800 GPD RO Membrane on its own.
One order. Years of calm.
Common questions
Which set should I choose?
The complete set renews both filters once. The 3-year set adds two spare pre-filters, so the next two pre-filter changes are already on your shelf.
Why does the 3-year set have three pre-filters and one membrane?
Because they last different lengths of time. The pre-filter is changed every 12 to 18 months and the membrane every 36 to 48 months, so three pre-filters cover about the life of one membrane.
Do I change both cartridges at once?
When both lights are on, yes. Each pushes in without tools; then reset the lights and flush for about 30 seconds. With the 3-year set, fit the membrane and one pre-filter now, and the spares wait their turn.
Can I subscribe instead?
The sets are one-time purchases. The single PPC pre-filter and the single RO membrane can each be set to arrive on a schedule you choose.
Will these fit another system?
No. Both cartridges are made only for the Haven 800 GPD Under Sink Tankless Reverse Osmosis System.
Specifications
- Complete set contents
- 1 PPC composite pre-filter (CQE-PR-8000), 1 800 GPD RO membrane (CQE-RO-8000)
- 3-year set contents
- 3 PPC composite pre-filters (CQE-PR-8000), 1 800 GPD RO membrane (CQE-RO-8000)
- Filter media
- 5 micron polypropylene, 5 micron coconut shell carbon block and 1 micron polypropylene (pre-filter); thin film composite (TFC) reverse osmosis membrane (membrane)
- PPC pre-filter
- Proprietary polypropylene composite, three layers in one cartridge; rated for 10,000 gallons; 12 to 18 months
- RO membrane
- 800 GPD thin film composite (TFC), 0.0001 micron; 36 to 48 months
- Salt rejection
- 95 to 99% of total dissolved solids
- Water temperature
- 41 to 100°F (5 to 38°C)
- Water pressure
- 14.5 to 58 psi (0.1 to 0.4 MPa)
- Cartridge sizes
- PPC pre-filter 4-3/8 in diameter x 8-3/4 in high; RO membrane 4-3/8 in diameter x 13-1/2 in high
- Shipping weight
- Complete set 6.6 lb; 3-year set 11.3 lb
- Change style
- Push in, no tools
- Fits
- Haven 800 GPD Under Sink Tankless Reverse Osmosis System (CQE-ROS-8000)
Production is rated at standard conditions. Actual output varies with water pressure, temperature and incoming water quality.


