Nitrate Removal Filter Cartridge

Nitrate (NO3) comes into water supplies through the nitrogen cycle rather than via dissolved minerals. It is one of the major ions in natural waters. Most nitrate in drinking water is the result of contamination of groundwater supplies by septic systems, feedlots, and agricultural fertilizers. Nitrate is reduced to nitrite in the body. These cartridges contain a special nitrate-selective resin. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels.

Important Note: The cartridge(s) in this system require manual salinity regeneration. The media must be recharged in order to maintain optimum performance. If the media is not regenerated, then the media will exhaust and result in a permeate of 0. The cycle of regeneration will vary based on the influent level of contaminants. The regeneration process should be done every 20 to 30 days depending on level of nitrate.

The process of regeneration involves dissolving salt in water (2-3 cups of salt for every 3-4 cups of water) stir well and soak (you may want to use something to hold the cartridge down) the cartridge for 1-2 hours, then soak the cartridge in tap water for an additional 1-2 hours, rinse with the tap running tap water and reinstall the cartridge. Regeneration is not required before its first use even if the cartridge has been unopened for a period of time.  

*Capacity is an estimate only and is dependent on influent water contaminants and filter usage.

*Cartridge color is subject to change without notice